Roland SP-404MKII hands-on: Dragging an iconic sampler into the fashionable age – Engadget

Roland SP-404MKII hands-on: Dragging an iconic sampler into the fashionable age – Engadget

The Boss and Roland line of SP samplers (particularly the SP-303 and SP-404) are a number of the most vital devices in hip hop historical past. Proper up there with the MPC and the Technics SL-1200. They’ve been utilized by the likes of MF Doom, Madlib and J Dilla, and are a favourite amongst lo-fi hip hop artists in all places. They’ve additionally been utilized by loads of different musicians like Panda Bear, 4 Tet, Oneohtrix Level By no means and even Radiohead. However, the unique SP-404 was launched in 2005. And despite the fact that it was succeeded by the 404SX and the 404A, these have been extraordinarily minor updates that did issues like swap from the getting old and gradual CF Card format to SD. The brand new SP-404MKII, although, lastly updates the traditional sampler for the fashionable age with out sacrificing what made the OG so alluring.

Bodily, the 404MKII is similar to previous variations of the 404. There are 4 knobs throughout the highest; a round window under them, flanked by six results buttons; and pads on the underside for triggering samples. The MKII does look higher than the A, at the very least. The 404A was designed to slot in with the remainder of Roland’s AIRA line — meaning stark black accented with garish pink and inexperienced. It’s… a glance. However not one that everybody (myself included) can get behind. The brand new model is a way more subdued grey and black, with white and muted orange accents.

Roland SP-404MKII

Terrence O’Brien / Engadget

Past pure aesthetics, although, there are some big upgrades within the MKII. The 2 most evident variations are the detailed OLED display screen that has changed the old-school seven-segment LEDs, and the transfer from a 12-pad structure to a 16-pad one.

The display screen represents the largest change to the SP expertise. Modifying samples on an OG 404 might be painful. The three-digit LEDs gave you solely generic begin and finish factors, and due to the excessive decision wanted to create good loops, the vary was very small. That will result in having to crop a pattern a number of instances to take off all the surplus. The OLED on the SP-404MKII is excessive sufficient decision to indicate the precise waveform because it’s being edited. You’ll be able to zoom out and in as wanted to crop as little or as a lot as you need. I might go so far as to say that recording and enhancing samples on the MKII shouldn’t be solely simpler, however truly kinda enjoyable.

The 16 pads offer you entry to extra samples and patterns to assemble your beats out of. Additionally, the four-by-four grid has develop into one thing of a regular. It’s the structure utilized by Akai on the MPC, on Pioneer’s DJ gear, on the Native Devices Maschine, Ableton’s Drum Rack and even a number of the bigger members of the SP household just like the 808 and the 606.

Roland SP-404MKII

Terrence O’Brien / Engadget

There are different extra delicate adjustments as effectively. For one, these 16 pads on the entrance are all velocity delicate, a primary for the SP line. That stated, it’s virtually unattainable to get full velocity out of them with out simply turning on mounted velocity. Some finger drummers particularly might favor to show mounted velocity on to maintain melodic and percussion components constantly combined, however it could actually additionally go away issues sounding a bit robotic and unnatural. Simply one thing to remember.

Roland added MIDI out to the again of the SP-404MKII as effectively. The earlier variations had MIDI IN solely. Now the 404 can be utilized to sequence exterior gear, and even be hooked as much as a PC to manage your DAW by way of USB-C. That makes the 16-pad structure much more vital, as a result of it’ll map higher to no matter you’re connecting it to most definitely. Oh. and that USB port may also be used to stream audio to your PC.

This additionally marks the primary time that Roland has ditched RCA in favor of ¼-inch jacks for the audio ins and outs on an SP. Now, this can be a internet optimistic however there’s a down facet. Typically an SP is getting used to pattern immediately from vinyl and most turntables use RCA. Which means there might be an middleman step to getting loops from a report to the 404. However, it does make it simpler to pattern immediately from an instrument. Synths, drum machines, guitars and basses all typically use ¼-inch plugs. And, because the ins and outs on the MKII are balanced, it needs to be much less inclined to noise and interference.

Leave a Reply

Your email address will not be published. Required fields are marked *